Payment & Shipping Terms:
|Material:||Steels Q235, Q345, Etc.||Color:||Yello, Blue, Etc. By Buyer's Option|
|Power Supply:||380V 50Hz Three-phase||Rated Loading Capacity:||3~28t|
|Span:||5--31m||Control Method:||Pendant Control And Remote Control|
|Feature:||Single Girder EOT Bridge Overhead Crane||Lifting Height:||36m|
single girder overhead travelling crane,
single girder overhead crane
Monorail Single Girder Overhead Crane With Hoist , 10 Ton Bridge Crane
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff.
4. Main lifting motor: with thermal protection and currency protection.
5. Hooks with latch
6. Rubber buffers
7. Protective earthing
8. Crane switch and travel end switch
9. Sub-assemblies characteristic are tested before assemly.
10. All cranes must be pre-assmebled and tested before leaving factory and offer the certification of test.
The single beam crane is small lifting capacity and travel along high I-Steel track.
tight dimension, low building headroom, light dead weight and light wheel load. It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of -25--40 centigrade. It is prohibited to use the equipment at combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment.
The capacity: 1T, 2T, 3T, 5T,10T,16T 20T; Span from 7.5m to 28.5m
Single Girder Overhead Crane Drawing
|Lifting capacity (T)||1, 2, 3, 5, 10T||16, 20T|
|Crane traveling mechanism||Traveling speed(m/min)||20||30||45||60||75||20|
|Power(kw)||2× 0.8||2× 1.5||1.5× 2|
(electric hoist)& electric hoist traveling mechanism
|Electric hoist model||CD1/MD1||MD1/HC|
|Lifting speed (m/min)||8, 8/0.8 7, 7/0.7||3.5 3.5/0.35|
|Lifting height (m)||6, 9, 12, 18, 24, 30||12, 18, 24, 30|
|Traveling speed (m/min)||20(30)||20(30)|
|Motor||Taper Squirrel-cage type||Taper Squirrel-cage type|
|Power supply||380V 50HZ three phase|
|Width of trail||37-70mm||37-70mm|
Contact Person: Colinniu